The Construction Process

1. We start with a piece of land - either raw land or existing home site. It can be your land or ours.
   
   
2. After accessing the property and obtaining construction financing a permit is pulled and we install a permit box.
   
   
3. Next the equipment shows up to
   dig the basement or foundation.
   If weather permits, digging takes
   one day.
   
   
4. After the hole is dug we shape
   one side of the hole to build a
   pad to park the home on.
   
   
5. We then begin to form the footing
   and pour the concrete. This
   process takes approximately
   two days.
   
   
6. We then strip the forms off of the footing and begin to set the forms for the walls. After setting all of
   the wall forms we pour concrete. This process takes approximately
   three days.
   
   
7. We then strip the wall forms and back fill the dirt. This takes about one day to complete.
   
   
8. Then your new home arrives in
   two or more pieces. We park the home on the dirt pad next to
   the wall.
   
   
9. We then raise the home up on a
   set of rollers and begin the
   process to roll over onto the basement or foundation. This process takes
   one day.
   
   
10. After the first half is set into place the second half is pulled up to the wall. We then repeat the previous process to raise and roll over onto the foundation and bring the two
    halves together.
    
    
11. After squeezing the home together we begin the interior and exterior finishes. This entire process takes five to seven days.
    
    
12. Interior close up.
    
    
13. While the home is being set we
    are working on utilities.
    
    
14. We have the capacity to do electric.
    
    
15. Your water – city, well or rural.
    
    
16. Your sewer – city septic, septic field
    or lagoon.
    
    
17. Your gas – city or propane.
    

Back to top